[Tango Mike]

When using the trip planning page on Garmin Pilot here's a typical result I'm seeing and for the life of me I can't figure out why. For an RV7 with data inputted correctly as far as I can tell:

DIS 116nm; ETE 0+47; REQ fuel 48 gal. Huh?

When viewing the same trip on the flight plan page: DIS 116; ETE 0+47; Speed 150kt; Initial Fuel 42 gal; Burn Rate 7.5 gph; REQ Fuel 90 gal. Huh? times two.

Anyone else having this issue?

Ideas?

 

[1001001]

When using the trip planning page on Garmin Pilot here's a typical result I'm seeing and for the life of me I can't figure out why. For an RV7 with data inputted correctly as far as I can tell:

DIS 116nm; ETE 0+47; REQ fuel 48 gal. Huh?

When viewing the same trip on the flight plan page: DIS 116; ETE 0+47; Speed 150kt; Initial Fuel 42 gal; Burn Rate 7.5 gph; REQ Fuel 90 gal. Huh? times two.

Anyone else having this issue?

Ideas?

I do not appear to be having this issue. Pilot (Android) updated for me a couple of days ago to ver. 5.1.0. Android or iOS?

 

[Tango Mike]

Thanks, I probably should have mentioned that. iOS v8.1.0

 

[Tracer 10]

Contact Garmin Aviation Support

1(866) 739-5687

 

[BobTurner]

Fuel in pounds instead of gallons?

 

[Tango Mike]

No, I checked every setting. One possibility that crossed my mind was erroneous values for fuel used during taxi, etc., and a mistake there could be causing it.

And as for calling Garmin, I'll do that, but I wanted to query the users first.

 

[Guilhermepilot]

I have the same issue on my GP