N Nick172 Member Sep 14, 2008 #1 I have a big gap between the Right side HS-905 nose rib and HS-902 front spar. The left side of the HS lined up fine. What can I do and/or what did I do wrong? Here it is. I place a piece of scrap angle in the gap to show the size. Thank you,
I have a big gap between the Right side HS-905 nose rib and HS-902 front spar. The left side of the HS lined up fine. What can I do and/or what did I do wrong? Here it is. I place a piece of scrap angle in the gap to show the size. Thank you,
N Nick172 Member Sep 14, 2008 #2 Never mind, I'm an idiot. The spar doubler goes there and would fill the gap.
airguy Unrepentant fanboy Sponsor Sep 16, 2008 #3 Nick172 said: Never mind, I'm an idiot. The spar doubler goes there and would fill the gap. Click to expand... I did the same thing, at the same point on my tail. Took me a few minutes of head scratching and looking at the plans carefully....
Nick172 said: Never mind, I'm an idiot. The spar doubler goes there and would fill the gap. Click to expand... I did the same thing, at the same point on my tail. Took me a few minutes of head scratching and looking at the plans carefully....
