My G3x (non touch) is indicating, engine running, 13.1V. After reading numerous
post re: the PC680 battery maintenance, this appears to be lower than the desired voltage for the 680.
Using my digital volt meter, temporarily connected to the ground buss I am reading 14.1V. with the engine running.
A 1V difference? I am relatively sure the 14.1V reading is correct, is there any way to adjust the G3X to indicate the correct buss voltage?
Dick
post re: the PC680 battery maintenance, this appears to be lower than the desired voltage for the 680.
Using my digital volt meter, temporarily connected to the ground buss I am reading 14.1V. with the engine running.
A 1V difference? I am relatively sure the 14.1V reading is correct, is there any way to adjust the G3X to indicate the correct buss voltage?
Dick