N

Notso

Member
Hi all, we just finished a new panel upgrade in my RV-8 and it looks beautiful. But now comes the “fun” part of programming all the parameters like engine numbers such as CHT, EGT, oil, green, yellow, and red arcs ranges, Fuel pressure, and all the myriad stuff to set.

My RV-8 has the Lycoming IO-360-200 angle valve motor (IO-360-A1B6).

Can anyone please point me to where I can find these numbers. Or maybe share your EFIS numbers if you’re willing. Also are there config files for RV-8s for the G3X?

Any help would be greatly appreciated. Thanks in advance!
 
Notso said:
Hi all, we just finished a new panel upgrade in my RV-8 and it looks beautiful. But now comes the “fun” part of programming all the parameters like engine numbers such as CHT, EGT, oil, green, yellow, and red arcs ranges, Fuel pressure, and all the myriad stuff to set.

My RV-8 has the Lycoming IO-360-200 angle valve motor (IO-360-A1B6).

Can anyone please point me to where I can find these numbers. Or maybe share your EFIS numbers if you’re willing. Also are there config files for RV-8s for the G3X?

Any help would be greatly appreciated. Thanks in advance!
Click to expand...
These links will give the basic informations you need. C177 does have the IO-360-A1B6.

good luck
 
You must log in or register to reply here.