flydjd
Well Known Member
Hi all,
Long story short, how far forward should the control sticks move ? Should they touch the F-704 bulkhead ?
I have a 7A QB and the forward deflection from upright is only approx 20 degrees...the stick is at least 4" away from the instrument panel.
The WD-610 control column then interferes with the undersides of the cut outs of the 4 inboard seat ribs. ( I have double checked that the Control system is assembled correctly ! )
Did anyone have to remove more material than the 1 1/2" hole shown on the inboard sear rib detail on Dwg 22 ?
Thanks
Long story short, how far forward should the control sticks move ? Should they touch the F-704 bulkhead ?
I have a 7A QB and the forward deflection from upright is only approx 20 degrees...the stick is at least 4" away from the instrument panel.
The WD-610 control column then interferes with the undersides of the cut outs of the 4 inboard seat ribs. ( I have double checked that the Control system is assembled correctly ! )
Did anyone have to remove more material than the 1 1/2" hole shown on the inboard sear rib detail on Dwg 22 ?
Thanks