[AviatorJ]

My wings are in the hangar but I'm going ahead and starting to run my light wires. I want to leave enough wire from the fuselage exit to run it down the wing later. I was thinking the wings all together were about 15' (From when I moved them in a box truck). Does that sound right? If so I'll leave 16' of wire coiled up outside the fuselage.

 

[1001001]

My wing measures 12' 5" from spar root to edge. Wing tips are about 18" at the middle.

 

[AviatorJ]

Okay thanks, I'll do 15' runs.

 

[1001001]

Just note that the 12' 5" doesn't include the tip, I may not have been clear there.

 

[az_gila]

I found all of my calculations (err... guesses) for wire length needed based on drawings usually came up short.

Add 10 % if you think you are accurate or 15-20 % otherwise.