I learned my lesson while cutting the hinges for the seat. So I was very careful to cut the hinges EXACTLY as illustrated in figure 1. But when I got to step 3 and figure 3 (23-08 Rev 1) I realized that the hinges have the tab sticking out of the wrong end. The hinges shown in Figure 1 are cut with the tabs on opposite ends compared to Figure 3 , even though they are supposed to be illustrations of the same part. Luckily I saved the hinges that I cut incorrectly for the seat and I can use those and not have to order new hinges. I assume that figure 3 is correct and figure 1 is drawn incorrectly. I will call Van's to verify that before proceeding further.
Joe
Joe