[gpiney]

I am taking the advice in the manual and I am going to fabricate the fuel lines and brake lines in advance of skinning the fuse.

I am using an Andair valve and Airflow Performance pump and filter. This is on a -8.

Does anyone with a similar setup care to post some photo's of their installation so I can get a better idea of what I am attempting to do?

Thanks in advance.

 

[rv8_builder]

Fuel and brake lines

Hi Greg,

Good idea to do this before skinning the fuse.

We also used the Andair valve and Airflow Performance pump and filter.

For photos of our setup have a look at:

http://www.mykitlog.com/users/display_log.php?user=rv8_builder&project=328&category=3897&log=72641&row=20

... and the following 3 log entries.

Hope this helps.

 

[gpiney]

Andre,

Perfect. Just what I was looking for.

For anyone else, It is somewhat difficult to follow the lines on the -1 plans. They are too difficult to follow just to highlight/color-code the lines. And there is absolutely nothing about using the Andair Valve.

I mounted the valve to the cover plate last night. Looks real good.

Thanks