TomVal
Well Known Member
I think the annual requirement of pulling the fuel tank finger strainer is perhaps an opening to weaken the tubing flare on the AN to strainer fitting. Repeated loosening and tightening of the fitting may subject that area to failure.
I would suggest (particularly if you are straining your mogas) to reducing the requirement to perhaps every other year. As an interim, per the condition inspection requirements, annually check the boost pump flow rate and the gascolator screen for contaminants.
This would also assume that you maintain fresh mogas in your tank.
What are your thoughts?
I would suggest (particularly if you are straining your mogas) to reducing the requirement to perhaps every other year. As an interim, per the condition inspection requirements, annually check the boost pump flow rate and the gascolator screen for contaminants.
This would also assume that you maintain fresh mogas in your tank.
What are your thoughts?
Last edited: