[DeltaHotel]

I am at the point of starting to fabricate fuel lines. I remember reading in a post that with Skyview, a new fuel flow sensor and bracket are required. Will this change of sensor and bracket require a change to the fuel lines I am about to fabricate? Does the new sensor and bracket come with the avionics kit, or must they be ordered seperately?
Thanks
Delta Hotel

 

[skydiverlv]

I see no reason they would change the flow transducer. Possibly the fuel pressure sensor is different or in a different position. The original flow transducer is compatible with Skyview.

 

[Bill_H]

See this thread
http://www.vansairforce.com/community/showthread.php?t=79529
It's the fuel PRESSURE sender changed for Skyview, not the flow transducer, and that is all firewall forward, a hose connection to the engine - not affecting the aluminum fuel lines. The correct sensor now comes with the engine kit. I think a replacement one comes with the SV if you already purchased the engine kit.

 

[DeltaHotel]

Thanks for the quick response. Makes more since, pressure transducer not fuel flow.
Thanks
DeltaHotel

 

[TS Flightlines]

Its only going to change the hoses, if you change the location of the accessory.
Tom