KALEWIS
Well Known Member
I am swapping out fuel pressure sensors and need some guidance. The old style VDO is installed, and I am going to the new style Kavlico.
I can pick up 5v power and ground from the manifold pressure sensor, but what happens with the brown wires on the VDO?
Are they both used?
Are they discarded and the green wire needs to terminate at the EMS unit in the avionics bay?
I can pick up 5v power and ground from the manifold pressure sensor, but what happens with the brown wires on the VDO?
Are they both used?
Are they discarded and the green wire needs to terminate at the EMS unit in the avionics bay?
