CFI1513840
Well Known Member
I have an AFP high pressure boost pump with a TMXIO-360. I just performed a fuel flow and pressure test of the boost pump. With the fuel line disconnected at the throttle body and routed into a container, I calculated the flow rate at about 45 GPH. With the fuel line reconnected, throttle closed, and mixture set at idle/cutoff, I get a fuel pressure of about 60 PSI.
I thought these readings were kind of high and wondered if they compare favorably with what other people are getting.
I thought these readings were kind of high and wondered if they compare favorably with what other people are getting.