D Daver Well Known Member Oct 13, 2008 #1 dwg 36A shows NO filter upstream of the boost pump. The instructions for the pump (from Van's) says a filter is "required" Just wondered what others are doing with this. Thanks! Dave -9A fuselage
dwg 36A shows NO filter upstream of the boost pump. The instructions for the pump (from Van's) says a filter is "required" Just wondered what others are doing with this. Thanks! Dave -9A fuselage
Mel Legacy Member Mentor Oct 13, 2008 #2 I have a filter on each tank just before the selector valve. This is, of course, upstream from the pump.
I have a filter on each tank just before the selector valve. This is, of course, upstream from the pump.
D Daver Well Known Member Oct 13, 2008 #3 fuel filters thanks for the reply Mel. Did you just use automotive type filters with clamped fitting? Dave
fuel filters thanks for the reply Mel. Did you just use automotive type filters with clamped fitting? Dave
Mel Legacy Member Mentor Oct 13, 2008 #4 Yes, I use the P/N 806 from Aircraft Spruce. They are automotive type filters rated at 10 psi. Of course in this position, they only see suction, no pressure.
Yes, I use the P/N 806 from Aircraft Spruce. They are automotive type filters rated at 10 psi. Of course in this position, they only see suction, no pressure.