My former piper arrow IO360 has fuel and oil pressure connections shown below.
Does anyone use these locations for pressure connections? Trying to decide if I should just disconnect, plug and then use the more typical locations. (Off the mechanical fuel pump and for oil use the currently plugged outlet up near the upper #3 dynafocal mount that is shown in the plans.
Does anyone use these locations for pressure connections? Trying to decide if I should just disconnect, plug and then use the more typical locations. (Off the mechanical fuel pump and for oil use the currently plugged outlet up near the upper #3 dynafocal mount that is shown in the plans.
![FP10122012A00014.jpg](/community/proxy.php?image=http%3A%2F%2Fwww.kitlog.com%2Fphotos%2Fproject_665%2Ffull%2FFP10122012A00014.jpg&hash=4bf7c90b27dedf3026a0f5dad25fcb4e)
![FP10122012A00015.jpg](/community/proxy.php?image=http%3A%2F%2Fwww.kitlog.com%2Fphotos%2Fproject_665%2Ffull%2FFP10122012A00015.jpg&hash=65eb257918a94e398b4b308f7c9f0f71)