N

N360DF

Active Member
Folks, anyone who can tell be the brand/type the flyefii using?

Or anyone with one on the shelf who can supply photos and measurements ?

Thanks
 
I'm an early adopter of Robert's EFII system. The throttle body I have is a Summit Racing part # SUM 227203. I tried looking it up on their website but I can't find it. Going by memory it is a 60MM bore--which is a little large for my 320. Robert may have a different supplier now.
 
Thanks for the info... I planning go with EFII. But I want to find the throttle body so I can make a 3D model and start create airbox/filter/cable etc.

I read some place he use BBK 80mm ?

Best regards
 
I used an airbox from a 1987 Nissan Stanza for my 9A. I modified the air intake to work by having an aluminum tube welded to a plate that bolts in place of the original elbow.
 
Last edited:
Just received my engine a few weeks ago.
EFII set up and has a BBK 65mm.
Just now starting to try to figure out how to connect the air box.

Really could use some intel on how to rig this air box.

Lloyd
 
You must log in or register to reply here.