Kyle, this is just a wild guess, so take this with a pound of salt... I assume that the pivoting point is not where you adjust the flaperon for the droop, I think the 11/32" distance from the skin is still the correct adjustment for the hinge bearings. IIf I understand the droop "concept" correctly, you adjust the control system so the trailing edge of both flaperons is 1/4" below the trailing edge of the wing (well, because of the flaperon there is not much trailing edge left on the wing). I understand that the pressure below the wing will push the flaperon upwards and therefore remove any play in the control system which seems to add up to a 1/4" at the flaperons' trailing edges.