krazydoc33
Member
I am still in the first five hour test period and have a rigging problem that I have not found in the archives. When deploying the flaperons to the first notch the plane rolls to the right. Going to the second notch it still rolls to the right but not as much.
I have checked the alignment several times and the right flaperon goes down very slightly more than the left one which should give a roll to the left! Adjusting the push rods would just move the stick off center. The two flaperons look identical and are very flat. The left one seems to be more effective but why?
Henry
I have checked the alignment several times and the right flaperon goes down very slightly more than the left one which should give a roll to the left! Adjusting the push rods would just move the stick off center. The two flaperons look identical and are very flat. The left one seems to be more effective but why?
Henry