s10sakota
Well Known Member
Sorry I don't have the part number handy, but if you built your flaps you will recognize this rib and reinforcement plate!
The big hole is where the flap actuator attaches to a nutplate riveted to both the rib and bracket.
As you can see, one hole is countersunk in the bracket, but what about the other hole? (there's a cleco in the hole in the pic). This rib is way too thin to countersink...right?
What am I to do here?
Thanks!
The big hole is where the flap actuator attaches to a nutplate riveted to both the rib and bracket.
As you can see, one hole is countersunk in the bracket, but what about the other hole? (there's a cleco in the hole in the pic). This rib is way too thin to countersink...right?
What am I to do here?
Thanks!