[Redbud40]

Does anyone have a picture of the completed SB for the flap motor rod end bearing. SB cartoon is there but thought I would see if anyone has a real picture of the drilled hole and safety wire completed on their flap motor rod bearing.
Thanks.
Mike R

 

[pazmanyflyer]

Does anyone have a picture of the completed SB for the flap motor rod end bearing. SB cartoon is there but thought I would see if anyone has a real picture of the drilled hole and safety wire completed on their flap motor rod bearing.
Thanks.
Mike R

Here's a good thread with pictures.
https://vansairforce.net/community/showthread.php?t=82498

 

[azrv6]

Posts #25 and #26 in this thread: https://vansairforce.net/community/showthread.php?p=1476954

 

[Redbud40]

Thanks much better than the cartoon. Also does the rod motor assembly require lubrication treatment ? And where would it be applied ? My flaps/ motor rod squeaks when they reach full travel up or down. Since I don’t have a gauge the squeak would alert they were up or down but I have been told this is not normal and to get it fixed.