[Mark Dickens]

Does anyone have drawings available for a cover over the flap motor arm that extends through the arm rest? Just thought I'd ask before reinventing the wheel!

 

[mannanj]

Cover

No one in the back has ever complained about my uncovered one in 500 hrs of flying.

I think it would be extra work for little or no return. My two cent opinion, worth just what you paid for it!

 

[Adam]

I made one, about 30 min to make it and used one screw to hold it in. Very EZ!

 

[Mark Dickens]

I made one, about 30 min to make it and used one screw to hold it in. Very EZ!

I figured as much but it's always nice to follow the beaten path if there is one.

 

[Dave Stephens]

Not the best picture and I don't have a drawing, I just folded it with thin Ali and covered it in leather and stuck it on with Velcro

Dave

 

[chrispratt]

Use the Search tab and type in Flap Actuator Cover. There's a thread from dbuds2 dated 3-15-2009 that includes a link to a drawing for a flap actuator cover (look a few posts down the thread).

Chris

 

[Mark Dickens]

Use the Search tab and type in Flap Actuator Cover. There's a thread from dbuds2 dated 3-15-2009 that includes a link to a drawing for a flap actuator cover (look a few posts down the thread).

Chris

Some good stuff there. Thanks for the info and ideas. This will definitely help me get started.