Just did my first test fitting of my left flap on my QB wing, with the aileron in neutral position. Nailed the gap; exactly 1/4".. and the line up looks fairly straight overall with the forward hinge half clecoed in position. The trailing edge is very slightly displaced forward... looks to be .04" (1/25th of an inch). It is visually noticeable... but for a first try this looks pretty good to me. Just wanted to get some opinions before riveting. I could always do another hinge half and try to make it perfect... but the curve in each trailing edge doesn't even match to that kind of tolerance, so I'm thinking this is ok. What do you think?