RVG8tor
Well Known Member
I have a TMX-IO-360 vertical induction, AFP fuel injection and dual P-Mag set up. I have picked up sever components for the FF installation individually. I have the exhaust system, alternator, propeller governor, and heat selector valve.
I have read posts where cable sizes and or brackets did not work with various set ups. So anyone with a set like mine have any information on how the FF Fwd kit worked out for you? Should I just order the DWG then order individual items? I am thinking of getting a kit that fits best, Van's seems to recommend ordering a kit for an O-360 with my set up. If there are any items in the kit that don't work out then I would just return the items, I am only 2 hours from Van's. I am hoping this might speed up things by saving me the time of determining every hose size.
Thanks for any help, I am guessing someone had gone down this road before.
Cheers
I have read posts where cable sizes and or brackets did not work with various set ups. So anyone with a set like mine have any information on how the FF Fwd kit worked out for you? Should I just order the DWG then order individual items? I am thinking of getting a kit that fits best, Van's seems to recommend ordering a kit for an O-360 with my set up. If there are any items in the kit that don't work out then I would just return the items, I am only 2 hours from Van's. I am hoping this might speed up things by saving me the time of determining every hose size.
Thanks for any help, I am guessing someone had gone down this road before.
Cheers
