The firewall forward kit from Vans is for an IO360 and I'm installing an IO390. So I'd like some advice to start accumulating the items I need to get the job done from the Rv8-IO390 builders. I'm also using the showplanes cowl.
I suppose I could start with the 360 list from vans and start deleting/adding/replacing. Was going to use the RV14 baffling
and snorkel and modify snorkel to fit.
Off the top of my head I would like advice on:
Prop governor
Cable lengths for prop/mixture/throttle
Special adapters 390 needs for cables to route
Alternator (will also search threads for light/best not airframe specific)
Oil cooler location and mounting
15" spinner and spinner plate for the Hartzell prop
Engine mounts (I assume same as what the 14A calls out)
Thanks!
-dudley
I suppose I could start with the 360 list from vans and start deleting/adding/replacing. Was going to use the RV14 baffling
and snorkel and modify snorkel to fit.
Off the top of my head I would like advice on:
Prop governor
Cable lengths for prop/mixture/throttle
Special adapters 390 needs for cables to route
Alternator (will also search threads for light/best not airframe specific)
Oil cooler location and mounting
15" spinner and spinner plate for the Hartzell prop
Engine mounts (I assume same as what the 14A calls out)
Thanks!
-dudley