The manual states: "Draw a fastener line on the upper surface of the trailing edge wedge 7/32" to 1/4" aft the forward edge."
What does VANS understand as "forward edge"? The first line I draw resulted in the wedge being pushed against the stiffeners in the middle. The second "forward edge" results that the wedge sticks out for about 4/32" at the trailing edge.
I tried to find some pictures from other builders but they generally don't give enough detail to confirm that this is the correct way.
What does VANS understand as "forward edge"? The first line I draw resulted in the wedge being pushed against the stiffeners in the middle. The second "forward edge" results that the wedge sticks out for about 4/32" at the trailing edge.
I tried to find some pictures from other builders but they generally don't give enough detail to confirm that this is the correct way.