Mike,
Do you have any pics showing the hardline?
I am looking at doing this but don't have any good places to secure with adels.
The nearest bolts are sump bolts and are vertical.....
Do you think it would be OK to put make an "S" turn so I'll have a horizontal section to secure with a clamp?
Glenn Wilkinson
Thank you for the responses. I was hoping that it would be a simple ID of a pre-made hose that Vans sells but apparently not. I'm leary of using a hard line in this area because of vibration and being next to the hottest parts of the engine on its run between the cylinders. I think I'll just have one made locally at a place that speciallizes in hydraulic hoses plus they can pressure test it.