[SHORTRV7]

I am ready to drill holes to mount my upper gear leg fairings and was wanting how and where you all drilled the holes into the CURVATURE of the cowling and the fuselage to put rivnuts. The directions call out for 4 screws, is that about right or did you put a screw at the very front also?
Appreciate the help!
Don

 

[Rockyjs]

I used 3 screws total. 2 into the cowling using nutplates and 1 in the aft part of the intersection fairing which I tapped for a 6-32 screw. Seems to be holding up just fine after 125 hours.

Rocky