I am having a difficult time with the Airbox vs the Chin Scoop Inlet. The distance required from the Inlet to the Mountplate appears to be short by about 1/2 inch. There is the FG Extension that is made to the Inlet and it appears to be about an inch long. Then the 1/4" gap between the Extension and the Top Plate. The Top Plate requires a 3/8" space for the gap seal rivets, now add the 4 1/2" for the Carb Heat Door/Hinge and I am 1/2 past the front edge of the Mountplate. !!
Thx
Rolly Clark
RV-9
Thx
Rolly Clark
RV-9