jimzap Member Sunday at 2:03 PM #1 How did you get a bucking bar on back of these rivets? Due to the canopy deck, there is a thin gap to get the bucking bar in there. Modify a bucking bar? Thx
How did you get a bucking bar on back of these rivets? Due to the canopy deck, there is a thin gap to get the bucking bar in there. Modify a bucking bar? Thx
wirejock Well Known Member Sunday at 4:42 PM #2 I have a thin tungsten. If memory serves, that's what I used. Same on the 7.
