HFS Well Known Member Jan 20, 2023 #1 A little "gadget" I made to help in starting hex nuts in those (inevitably) hard to reach places. Appropriately sized socket, with a magnet imbedded at a depth = to ht. of nut, attached with epoxy to a dowel. HFS Attachments EZ-HOLD - Nut Starter .jpg 211 KB · Views: 392
A little "gadget" I made to help in starting hex nuts in those (inevitably) hard to reach places. Appropriately sized socket, with a magnet imbedded at a depth = to ht. of nut, attached with epoxy to a dowel. HFS
B Bavafa Well Known Member Jan 20, 2023 #2 Made in USA with imported parts from Taiwan, a clever tool/idea Thanks for sharing.
wirejock Well Known Member Jan 20, 2023 #3 EZ-tool All David's EZ products work great. I use the Adel clamp tool every day. I actually made a set of sockets like his. Great minds!
EZ-tool All David's EZ products work great. I use the Adel clamp tool every day. I actually made a set of sockets like his. Great minds!
P pat76cj Active Member Jan 20, 2023 #4 Handee clamp works pretty good too. Better than the masking tape on a wrench idea (which still works in a pinch).
Handee clamp works pretty good too. Better than the masking tape on a wrench idea (which still works in a pinch).
scsmith Well Known Member Jan 20, 2023 #5 Would be cool to have a set of these with the socket bonded at 90°, 45°, and 0° as shown. Most of the time, I just use a hemostat.
Would be cool to have a set of these with the socket bonded at 90°, 45°, and 0° as shown. Most of the time, I just use a hemostat.
climberrn Well Known Member Jan 21, 2023 #6 scsmith said: Most of the time, I just use a hemostat. Click to expand... Never had much luck with hemostats for nuts, only washers. Much prefer needle nose vice grips for nuts.
scsmith said: Most of the time, I just use a hemostat. Click to expand... Never had much luck with hemostats for nuts, only washers. Much prefer needle nose vice grips for nuts.
wirejock Well Known Member Jan 21, 2023 #7 Nuts I've also had success with a small magnetic pickup. It has a really strong magnet. It holds the nut and washer. I rotate it and the nut starts. David's product probably works better.
Nuts I've also had success with a small magnetic pickup. It has a really strong magnet. It holds the nut and washer. I rotate it and the nut starts. David's product probably works better.
Fred.Stucklen Well Known Member Friend Jan 21, 2023 #8 EZ Products I'm interested in his Adel clamp tool. Can somebody post his website?
Fred.Stucklen Well Known Member Friend Jan 21, 2023 #10 David's EZ products David Paule said: Contact him directly. Dave Click to expand... I'd sure like to do that but need to don't have his contact information.
David's EZ products David Paule said: Contact him directly. Dave Click to expand... I'd sure like to do that but need to don't have his contact information.
wirejock Well Known Member Jan 21, 2023 #11 David Howe Fred.Stucklen said: I'd sure like to do that but need to don't have his contact information. Click to expand... [email protected] He is pretty quick to reply.
David Howe Fred.Stucklen said: I'd sure like to do that but need to don't have his contact information. Click to expand... [email protected] He is pretty quick to reply.
DennisRhodes Well Known Member Jan 21, 2023 #12 Kinda like this one found at the corner of HungLo and Harbor Freight?