Hi folks,
I'm working on the Center Section Assembly and discovered a hole that I'm not sure how to deal with. I've successfully clecoled & clamped the Aft Bulkhead to the Center Section and Bottom Skin. I was just about ready start final drilling all of the #30 holes when I noticed a hole that's clearly larger than the #30 called out and it does not appear on the plans (Rev 1, 10/8/12). I can't find an instruction telling me if I'm to final drill through it or not. I've included an excerpt from the drawing referenced on page 20-04.
In the photo, I've drawn an arrow to the hole in question. (Ignore the black dotted hole?it's marked to be final drilled #11).
I don't see that I'm supposed to drill anything there, or am I?
Thanks in advance,
-dbh
I'm working on the Center Section Assembly and discovered a hole that I'm not sure how to deal with. I've successfully clecoled & clamped the Aft Bulkhead to the Center Section and Bottom Skin. I was just about ready start final drilling all of the #30 holes when I noticed a hole that's clearly larger than the #30 called out and it does not appear on the plans (Rev 1, 10/8/12). I can't find an instruction telling me if I'm to final drill through it or not. I've included an excerpt from the drawing referenced on page 20-04.
In the photo, I've drawn an arrow to the hole in question. (Ignore the black dotted hole?it's marked to be final drilled #11).
I don't see that I'm supposed to drill anything there, or am I?
Thanks in advance,
-dbh
![20-04_excerpt.jpg](/community/proxy.php?image=http%3A%2F%2Fserver.dbhill.net%2FN76012%2F20-04_excerpt.jpg&hash=7890510024d16d749d79079ea2c24645)
![extra_hole.jpg](/community/proxy.php?image=http%3A%2F%2Fserver.dbhill.net%2FN76012%2Fextra_hole.jpg&hash=44ef0114f991e37aff70e89e5d50924c)