llavalle
Well Known Member
When riveting the rear spar on my -9 emp, I found an extra hole. It's in the middle of the spar, just over the 2 first lighting holes.
The hole was the exact same size as the other ones. Should I put a rivet in there? Its not shown on the plans.
I'm not going to rivet the rear spar anyway (pre-close inspection required in Canada) so I can still work on it.
Thanks
The hole was the exact same size as the other ones. Should I put a rivet in there? Its not shown on the plans.
I'm not going to rivet the rear spar anyway (pre-close inspection required in Canada) so I can still work on it.
Thanks