Last night I managed to knock my Sioux air drill off the bench together with the Avery 90 degree drill attachment. Now both the drill and the attachment have considerable runout... I've emailed Snapon and Avery to see if they can be repaired. If not, that drop would cost me over $300
The positive part is that this happened after I drilled the last hole in my horizontal stabilizer. I can at least continue with deburring, dimpling, etc while I get the drill repaired or replaced.
Argh!
Boris
-7 empennage
The positive part is that this happened after I drilled the last hole in my horizontal stabilizer. I can at least continue with deburring, dimpling, etc while I get the drill repaired or replaced.
Argh!
Boris
-7 empennage