jay.pearlman
Well Known Member
I mounted a vetterman exhaust for the first time yesterday on an IO-360M1B. It fit well except for two challenges (maybe three) which I hope someone has creative solutions for. I attach a picture.
1. The crossover on the exhaust hits the throttle cable for the front horizontal injector.
2. The two exhaust pipes where they crossover rub against each other (hmmmm!)
3. The natural position for the heat muff where most have been putting it has fittings for the pipe connections and the ball joint is close.
Love the exhaust, just need some help on the three issues.
Picture posted at http://i52.tinypic.com/xm3b4h.jpg
1. The crossover on the exhaust hits the throttle cable for the front horizontal injector.
2. The two exhaust pipes where they crossover rub against each other (hmmmm!)
3. The natural position for the heat muff where most have been putting it has fittings for the pipe connections and the ball joint is close.
Love the exhaust, just need some help on the three issues.
Picture posted at http://i52.tinypic.com/xm3b4h.jpg
Last edited by a moderator: