vmirv8bldr
Well Known Member
I'm almost finished sealing up my first tank. I didn't want to ruin my primary pop-rivet puller, so I shopped around to find a cheap one to grind away so it will fit in the Z-brackets, and other tight spaces for that matter.
I checked out the usual suspects, HD, L, NT, etc, but alas, no joy. I then checke dout one that rhymes with Dig Pots and they had a perfect candidate for a measly $3.88.
About six sessions on the belt sander (so it's not glowing) and the nose is ground down quite well!
Next cheapest thing I could find was $12.
I checked out the usual suspects, HD, L, NT, etc, but alas, no joy. I then checke dout one that rhymes with Dig Pots and they had a perfect candidate for a measly $3.88.
About six sessions on the belt sander (so it's not glowing) and the nose is ground down quite well!
Next cheapest thing I could find was $12.
Last edited:
