OK, thanks but those are more like ADs and not exactly what I had in mind.
I'm looking for errors (or at least ambiguities) in the plans that could easily be fixed with some editing on Van's part. For instance, neither the drawings nor the instructions state that the wing joint plates (W-423) are not supplied; instead they are fabricated from AS3-032-1-1/2X36-1/2.
Another example: under "Fitting the Main Skins (p7-4), the first time the bottom skins are mentioned has to do with removing them. Clecoing them on was not explicitly mentioned when the top skins were cleco'd on.
These are not hugh deals but would reduce the amount of "head scratching" time and frustration dealing with Van's somewhat vague documentation. So I'm looking for any lists of known errata or corrections or procedural updates to the plans.
