[Dennis Madden]

Folks,
finishing up my oil pump A/D, oil filter install and a bunch of other clean up on my purchased RV-4. Went to hang the motor back on and could not remember how the motor mounts went on... Does anyone have, or can you point me to..a picture of what it looks like? The order and orientation of all the hardware back there? Thanks in advance.
Almost done...

 

[Kahuna]

The engine mount will only go one way.

If you mean the isolators, you put the one with the sandwiched plate on the side supporting the weight.
Forward of the engine ear on the top ones, behind the ears on the bottom ones.

Best

 

[dcleco]

there is a diagram of the mounts in the constrution manual. shows everything very well.

 

[rich]

engine mount bolts

Don't forget about the 4 engine mount bolts.
2 are longer, 2 are shorter.
Rich

 

[Dennis Madden]

Thats what I was looking for. Thanks kahuna
DM

 

[Dennis Madden]

The engine mount will only go one way.

If you mean the isolators, you put the one with the sandwiched plate on the side supporting the weight.
Forward of the engine ear on the top ones, behind the ears on the bottom ones.

Best

Thats what I was looking for. Thanks kahuna
DM

 

[Steve Sampson]

....also the oil pressure sender.

....also the oil pressure sender. Top right here. http://gikonfwf.blogspot.com/2007/01/o-320-d1a-arrived-today.html#links

Double cclick pictures to enlarge.

Good luck, Steve.