It's not what I envisioned when I put the anl/shunt on the firewall, but before I make anymore wires I wanted to check with VAF. The anl/ shunt is on the right (copilot) side of the firewall about halfway top to bottom. The top nut of the shunt is 1/8 inch from the engine mount tube. The wires and terminals 1/4 inch away.
I was going to put a rubber boot on it and no amount of firewall flexing will make it touch. In a crash it could bend and touch but the master and alt should cut power. Is it too close and I should move it or it is fine and build on?
![A226F262-BB06-48BF-AF9C-2FFFFB5B9827-17023-000008C0E7B9629D_zpsa6dae0ac.jpg](/community/proxy.php?image=http%3A%2F%2Fi1137.photobucket.com%2Falbums%2Fn516%2Fcrabandy%2FA226F262-BB06-48BF-AF9C-2FFFFB5B9827-17023-000008C0E7B9629D_zpsa6dae0ac.jpg&hash=553a1c09f53a39661c84f83c2f2e794b)
![399A1D7E-D6B3-4A2B-9775-65946ED731EE-17023-000008C0F924C190_zps548b3e1c.jpg](/community/proxy.php?image=http%3A%2F%2Fi1137.photobucket.com%2Falbums%2Fn516%2Fcrabandy%2F399A1D7E-D6B3-4A2B-9775-65946ED731EE-17023-000008C0F924C190_zps548b3e1c.jpg&hash=65e855d8d29e72a0503c64aeac155d12)
I was going to put a rubber boot on it and no amount of firewall flexing will make it touch. In a crash it could bend and touch but the master and alt should cut power. Is it too close and I should move it or it is fine and build on?