Drawing 33 calls for AN6-34 bolts.
Seems too long. Requires at least three extra washers.
Actually could easily cut 5/8" off the forward-facing end of the two bolt tubes. without touching the welds.
Any reason not to cut the tubes and go down to AN6-26 bolts?
(I keep reading "build it light" but after handling 15 pound gear legs I guess a few ounces here and there doesn't matter).
Finn
Seems too long. Requires at least three extra washers.
Actually could easily cut 5/8" off the forward-facing end of the two bolt tubes. without touching the welds.
Any reason not to cut the tubes and go down to AN6-26 bolts?
(I keep reading "build it light" but after handling 15 pound gear legs I guess a few ounces here and there doesn't matter).
Finn