boom3
Well Known Member
OK sorry for the dumb question, I don't have my IO-360 manual handy and am hoping to make a Aircraft Spruce order today.
I would like a longer valve cover bolt to utilize it for my oil cooler brace. They are 1/4 but phillips head and coarser than 1/4-28.
Also looking for a little longer bolt for the back of the oil sump where the exaust hanger brackets attach. By the time you add a couple washers on the inside to clear the casting I'm thinking a little longer bolt would be better. These are hex head 1/4 size but again not 1/4-28.
I can figure out the length I need, I just don't know what they are called in the world of AN bolts.
Thanks!
I would like a longer valve cover bolt to utilize it for my oil cooler brace. They are 1/4 but phillips head and coarser than 1/4-28.
Also looking for a little longer bolt for the back of the oil sump where the exaust hanger brackets attach. By the time you add a couple washers on the inside to clear the casting I'm thinking a little longer bolt would be better. These are hex head 1/4 size but again not 1/4-28.
I can figure out the length I need, I just don't know what they are called in the world of AN bolts.
Thanks!