At Jeff R's suggestion am here looking for suggestions on getting the fiberglass work underway and having no such prior experience. In northwestern Montana I'm a long way from looking at other projects. Perhaps you know of a builder that has put up some good general fiberglass info on a web site.
The rudder bottom R911 is marked for notching out to accept the rudder horn. The mark also extends along the bottom to the trailing edge and also kind of swaggles around the leading edge of that piece. Initially, because the mark paralleling the R918 attach strip matched the amount of protrusion of the attach strip it did not occur to me that it would be trimmed as marked. On more examination I am tempted to trim it as maybe it was added
only for production purposes. 'Sure would hate to goof this up!
'Would much appreciate any insites you gained in your experience!
TIA
Kimmer
Thompson Falls, MT
The rudder bottom R911 is marked for notching out to accept the rudder horn. The mark also extends along the bottom to the trailing edge and also kind of swaggles around the leading edge of that piece. Initially, because the mark paralleling the R918 attach strip matched the amount of protrusion of the attach strip it did not occur to me that it would be trimmed as marked. On more examination I am tempted to trim it as maybe it was added
only for production purposes. 'Sure would hate to goof this up!
'Would much appreciate any insites you gained in your experience!
TIA
Kimmer
Thompson Falls, MT