[Anna]

Hello People!

We've just started our RV-8 project with the Horizontal Stabilizer and are short before riveting. We left out the holes on the top side of the Horizontal Stabilizer, which are marked in the plan.
But there is one Problem: We don't know how to fix the Empennage Fairing Attachment on the BACK side of the Horizontal Stab. Are there any holes we shouldn't dimple, too? Because the planes (DWG-3 and DWG-85) doesn't show it.

Thanks a lot for your help!
Best wishes form Germany
Anna

 

[Kyle Boatright]

The fairings that attach below the HS are attached to the fuselage.

I hope this helps.

 

[Anna]

Yes, it helps!
Thank you very much Kyle!