mculver
Well Known Member
I am in the final stages of assembling the empennage, and am at the stage where you are supposed to try-fit the elevators to the HS, then drill the elevator horns for the bolt that goes thru the hinge bearing (VA-146).
Per the photo below, left-to-right appears to be off center. Any thoughts from others about what would cause this?
BTW, click on the photo for a much larger version...
![](/community/proxy.php?image=http%3A%2F%2Frv9-thumbnails.s3.amazonaws.com%2FIMG_4706.jpg&hash=8ef345b4b42d29f4b93de9bb0068aa65)
Thanks,
Mike
Per the photo below, left-to-right appears to be off center. Any thoughts from others about what would cause this?
BTW, click on the photo for a much larger version...
![](/community/proxy.php?image=http%3A%2F%2Frv9-thumbnails.s3.amazonaws.com%2FIMG_4706.jpg&hash=8ef345b4b42d29f4b93de9bb0068aa65)
Thanks,
Mike