Now that I have everything flight ready on the empanage, (or so I thought), I am noticing considerable resistance to movement of the stick fore and aft. I know it is too stiff and must be loosened up as it requires much more force than the normal RV controls that nearly glide from stop to stop with very little resistance.
I would sure like to hear about what others have done to remedy this condition.
Mine seemed pretty decent until I did the final tightening of the AN3 bolts at the hinge points. My neighbor is having the same problem with his and has had it apart a few time in an attempt to get free it up, but no joy.
Ideas and or cures appreciated!
Randy C
RV7A, wings on, getting close...
I would sure like to hear about what others have done to remedy this condition.
Mine seemed pretty decent until I did the final tightening of the AN3 bolts at the hinge points. My neighbor is having the same problem with his and has had it apart a few time in an attempt to get free it up, but no joy.
Ideas and or cures appreciated!
Randy C
RV7A, wings on, getting close...