During the preliminary fitting of the elevator tip fairing, there is a gap between the forward part of the fairing and the E-913 counterbalance skin.
Should I flatten the forward flange of the inner and outboard tip rib - E-903, 904, so that the counterbalance skin sits flatter? The fairing leading edge is flat, the counterbalance skin is curved, governed by the E-903,904 tip ribs forward flange.
Should I flatten the forward flange of the inner and outboard tip rib - E-903, 904, so that the counterbalance skin sits flatter? The fairing leading edge is flat, the counterbalance skin is curved, governed by the E-903,904 tip ribs forward flange.