[AltonD]

I saw a post about where to buy the drill bushing for drilling the control arm. I've searched high and low but cannot find it again.

Does anybody know where to get a manufactured 1/4" OD drill bushing with a 3/32 center hole?

 

[newsum]

Source for "Drill Bushing"

McMaster-Carr. Search on "Drill Bushing" on the web site at-

http://www.mcmaster.com

Another option is United Drill Bushing Corp.

http://www.ucc-udb.com/

Their are probably a lot of others.

 

[AltonD]

thanks. that's the one.

 

[cjensen]

i got mine from mcmaster, and had to run the bushing on the wheel to grind it down EVER SO SLIGHTLY. great company, and fast shipping, just a milihair too wide.

fyi.

 

[AltonD]

I mic'd the bolt that goes through it, .247" and it is snug. The spec on the bushing is .25 and the tolerance is .0016 to .0013", so I was thinking just that.
Thanks for the input.