leesafur Member Jul 21, 2007 #1 Page 21 in the plans, view C-C Top View shows 1/8" rivits mounting the bellcrank mount to F-306 and F-307 bulkhead. Wondering what others have done here as there is not enough edge distance for the rivits. I'm stumped and would hate to have this fail in flight!http://pictures.aol.com/galleries/leesafur/6800Q5rfs8MzT02SJlASpqUsVVnlml0UJTbnv4xQp5Fd3Ig=/large/ Thanks Lee
Page 21 in the plans, view C-C Top View shows 1/8" rivits mounting the bellcrank mount to F-306 and F-307 bulkhead. Wondering what others have done here as there is not enough edge distance for the rivits. I'm stumped and would hate to have this fail in flight!http://pictures.aol.com/galleries/leesafur/6800Q5rfs8MzT02SJlASpqUsVVnlml0UJTbnv4xQp5Fd3Ig=/large/ Thanks Lee
T Tony Spicer Well Known Member Jul 22, 2007 #2 Lee, I used one AN3 at each of the four corners. Might have used nutplates as well, but don't remember. Tony
Lee, I used one AN3 at each of the four corners. Might have used nutplates as well, but don't remember. Tony