[mfshook62]

I have a 9a with a panel switch to control trim. I would like to convert control to a switch on the grip. I noticed on Vans that there is also a servo speed control that is available, my servo speed is way too coarse for fine tuning trim. Does anyone have a schematic for these items, or know how to make these conversions? There is not much info on the website.

Thanks for your time,

 

[647jc]

You should probably go to the Ray Allen web site. That is where the trim systems come from including stick grips and speed controls. They also have schematics and install instructions at the web site http://www.rayallencompany.com/.

 

[L.Adamson]

Look under "ordering & support" at the upper left....from this link. There is all kinds of schematics for different trim & stick configuations.

http://www.rayallencompany.com/products/servos.html

L.Adamson --- RV6A

 

[L.Adamson]

You should probably go to the Ray Allen web site. That is where the trim systems come from including stick grips and speed controls. They also have schematics and install instructions at the web site http://www.rayallencompany.com/.

Okay............you beat me to it! At least it's the same company...