Heads up on the fit of the Ray Allen elevator trim servo - I laid out the attach brackets according to the measurements in the plans (quadruple checked that I didn't get them wrong), but those measurements end up putting the whole thing off-center. I don't know if the size of the servo has changed over time or if the dimensions in the plans have just always been wrong. I guess next task for me is making a new access cover and shifting things over.
![20240114_143839.jpg 20240114_143839.jpg](https://vansairforce.net/data/attachments/32/32535-4c447cb9b6bc5fb74cc32bed84294dad.jpg)
![20240114_143839.jpg 20240114_143839.jpg](https://vansairforce.net/data/attachments/32/32535-4c447cb9b6bc5fb74cc32bed84294dad.jpg)