Strike69
Active Member
The drawing below is my planned electrical system - VP-X, Garmin G3X EFIS, and dual p-mags. The stick mixer takes the various stick functions from both cockpits and provides one signal (for each function) to the system.
The starter system is a little non-traditional. I am planning a stick starter button instead of the traditional keyed starter. To provide a margin of safety to keep the prop from turning unintentionally/inadvertently, I designed a relay to require both the key to be in and turned to both AND the start push energized and depressed.
Any comments, gotchas, or things i have missed are welcome.
Thanks
Strike
The starter system is a little non-traditional. I am planning a stick starter button instead of the traditional keyed starter. To provide a margin of safety to keep the prop from turning unintentionally/inadvertently, I designed a relay to require both the key to be in and turned to both AND the start push energized and depressed.
![ElectricalSystemv3_zps081a3c07.jpg](/community/proxy.php?image=http%3A%2F%2Fi1057.photobucket.com%2Falbums%2Ft392%2FStrikeman1969%2FElectricalSystemv3_zps081a3c07.jpg&hash=922f2d36934a5ef268cb99c1c95267e0)
Any comments, gotchas, or things i have missed are welcome.
Thanks
Strike