Tony Kirk
Well Known Member
Can someone who is using the Grand Rapids EIS4000 for fuel tank gauging with Van's float senders (Stewart Warner) please give me their current EIS Scale Factor and AuxOffset settings.
Sandy sent me a wonderful document on the calibration process but it requires full tanks. Since the wings are already on the 6A and I don't want to fill both tanks at the current time, I would like to have a ballpark setting then go back and fine tune during the Phase 1 flight tests.
Also, at what quantity of fuel does the float run out of headroom (top out) and additional fuel won't increase the EIS fuel level.
Sandy sent me a wonderful document on the calibration process but it requires full tanks. Since the wings are already on the 6A and I don't want to fill both tanks at the current time, I would like to have a ballpark setting then go back and fine tune during the Phase 1 flight tests.
Also, at what quantity of fuel does the float run out of headroom (top out) and additional fuel won't increase the EIS fuel level.